-
Guest Blog: TURAG
For more than ten years, students at the Robotics Working Group of the Technical University of Dresden, or TURAG for short, have been developing mobile robotics solutions independently for participation in national and international competitions. The Eurobot robotics contest, which is held once a year in France, is the main motivation for the working group. […]
-
Driving a linear stage with the TMC4671 – Firmware Adaptation
In our last blog post, we were able to determine stable P-I-parameters for our cascaded controller loop. With that knowledge in mind I want to show you how I created a small example program which I will include in the firmware of the Landungsbrücke. What this code basically does is initializing the TMC4671 for stepper motor control. This is done in init_Basics(…) by writing several […]
-
Driving a Linear Stage With the TMC4671 – Controller Tuning
Welcome back to my blog post series! I previously described how I set everything up in the post: Driving a Linear Stage With the TMC4671 – Setup. Today I will show you how I tuned my controller gains for torque/flux-, velocity- and position-mode. In order to do this, I use the USB-2-RTMI adapter and the […]
-
Driving a Linear Stage With the TMC4671 – Setup
The TMC4671 is Trinamic‘s FOC servo controller IC, capable of controlling BLDC, DC and stepper motors. In this post, I’d like to show you how to configure the TMC4671-Eval Board with our Landungsbrücke interface board to drive a linear stage. For this, I use the TMCL-IDE, Trinamic’s free and easy to use graphical user interface. […]
-
How to use graphs within TMCL-IDE and log data
In the video below, our Field Application Engineer Thomas Ernst explains how you can use graphs for your own evaluations. Trinamics TMCL-IDE is an integrated development environment that allows for easy and in-depth exploration of all Trinamic products supporting the TMCL protocol. You can try for yourself using a PD1270 PANdrive, a potentiometer, and the […]